CVE-2022-48871 (GCVE-0-2022-48871)

Vulnerability from cvelistv5 – Published: 2024-08-21 06:10 – Updated: 2025-05-04 08:25
VLAI?
Title
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Summary
In the Linux kernel, the following vulnerability has been resolved: tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer.
Severity ?
No CVSS data available.
Assigner
References
Impacted products
Vendor Product Version
Linux Linux Affected: f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9 , < 894681682dbefdad917b88f86cde1069140a047a (git)
Affected: f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9 , < cb53a3366eb28fed67850c80afa52075bb71a38a (git)
Affected: f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9 , < fd524ca7fe45b8a06dca2dd546d62684a9768f95 (git)
Affected: f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9 , < b8caf69a6946e18ffebad49847e258f5b6d52ac2 (git)
Create a notification for this product.
    Linux Linux Affected: 5.7
Unaffected: 0 , < 5.7 (semver)
Unaffected: 5.10.165 , ≤ 5.10.* (semver)
Unaffected: 5.15.90 , ≤ 5.15.* (semver)
Unaffected: 6.1.8 , ≤ 6.1.* (semver)
Unaffected: 6.2 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2022-48871",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2024-09-10T16:05:28.910017Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2024-09-12T17:32:54.202Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/qcom_geni_serial.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "894681682dbefdad917b88f86cde1069140a047a",
              "status": "affected",
              "version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9",
              "versionType": "git"
            },
            {
              "lessThan": "cb53a3366eb28fed67850c80afa52075bb71a38a",
              "status": "affected",
              "version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9",
              "versionType": "git"
            },
            {
              "lessThan": "fd524ca7fe45b8a06dca2dd546d62684a9768f95",
              "status": "affected",
              "version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9",
              "versionType": "git"
            },
            {
              "lessThan": "b8caf69a6946e18ffebad49847e258f5b6d52ac2",
              "status": "affected",
              "version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/qcom_geni_serial.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.7"
            },
            {
              "lessThan": "5.7",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.165",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.90",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.8",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.165",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.90",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.8",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.2",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\n\nDriver\u0027s probe allocates memory for RX FIFO (port-\u003erx_fifo) based on\ndefault RX FIFO depth, e.g. 16.  Later during serial startup the\nqcom_geni_serial_port_setup() updates the RX FIFO depth\n(port-\u003erx_fifo_depth) to match real device capabilities, e.g. to 32.\n\nThe RX UART handle code will read \"port-\u003erx_fifo_depth\" number of words\ninto \"port-\u003erx_fifo\" buffer, thus exceeding the bounds.  This can be\nobserved in certain configurations with Qualcomm Bluetooth HCI UART\ndevice and KASAN:\n\n  Bluetooth: hci0: QCA Product ID   :0x00000010\n  Bluetooth: hci0: QCA SOC Version  :0x400a0200\n  Bluetooth: hci0: QCA ROM Version  :0x00000200\n  Bluetooth: hci0: QCA Patch Version:0x00000d2b\n  Bluetooth: hci0: QCA controller version 0x02000200\n  Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv\n  bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2\n  Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)\n  Bluetooth: hci0: QCA Failed to download patch (-2)\n  ==================================================================\n  BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c\n  Write of size 4 at addr ffff279347d578c0 by task swapper/0/0\n\n  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26\n  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)\n  Call trace:\n   dump_backtrace.part.0+0xe0/0xf0\n   show_stack+0x18/0x40\n   dump_stack_lvl+0x8c/0xb8\n   print_report+0x188/0x488\n   kasan_report+0xb4/0x100\n   __asan_store4+0x80/0xa4\n   handle_rx_uart+0xa8/0x18c\n   qcom_geni_serial_handle_rx+0x84/0x9c\n   qcom_geni_serial_isr+0x24c/0x760\n   __handle_irq_event_percpu+0x108/0x500\n   handle_irq_event+0x6c/0x110\n   handle_fasteoi_irq+0x138/0x2cc\n   generic_handle_domain_irq+0x48/0x64\n\nIf the RX FIFO depth changes after probe, be sure to resize the buffer."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-05-04T08:25:12.205Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/894681682dbefdad917b88f86cde1069140a047a"
        },
        {
          "url": "https://git.kernel.org/stable/c/cb53a3366eb28fed67850c80afa52075bb71a38a"
        },
        {
          "url": "https://git.kernel.org/stable/c/fd524ca7fe45b8a06dca2dd546d62684a9768f95"
        },
        {
          "url": "https://git.kernel.org/stable/c/b8caf69a6946e18ffebad49847e258f5b6d52ac2"
        }
      ],
      "title": "tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2022-48871",
    "datePublished": "2024-08-21T06:10:01.859Z",
    "dateReserved": "2024-07-16T11:38:08.921Z",
    "dateUpdated": "2025-05-04T08:25:12.205Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1",
  "vulnerability-lookup:meta": {
    "vulnrichment": {
      "containers": "{\"adp\": [{\"title\": \"CISA ADP Vulnrichment\", \"metrics\": [{\"other\": {\"type\": \"ssvc\", \"content\": {\"id\": \"CVE-2022-48871\", \"role\": \"CISA Coordinator\", \"options\": [{\"Exploitation\": \"none\"}, {\"Automatable\": \"no\"}, {\"Technical Impact\": \"partial\"}], \"version\": \"2.0.3\", \"timestamp\": \"2024-09-10T16:05:28.910017Z\"}}}], \"providerMetadata\": {\"orgId\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"shortName\": \"CISA-ADP\", \"dateUpdated\": \"2024-09-11T12:42:11.934Z\"}}], \"cna\": {\"title\": \"tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\", \"affected\": [{\"repo\": \"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\", \"vendor\": \"Linux\", \"product\": \"Linux\", \"versions\": [{\"status\": \"affected\", \"version\": \"f9d690b6ece7\", \"lessThan\": \"894681682dbe\", \"versionType\": \"git\"}, {\"status\": \"affected\", \"version\": \"f9d690b6ece7\", \"lessThan\": \"cb53a3366eb2\", \"versionType\": \"git\"}, {\"status\": \"affected\", \"version\": \"f9d690b6ece7\", \"lessThan\": \"fd524ca7fe45\", \"versionType\": \"git\"}, {\"status\": \"affected\", \"version\": \"f9d690b6ece7\", \"lessThan\": \"b8caf69a6946\", \"versionType\": \"git\"}], \"programFiles\": [\"drivers/tty/serial/qcom_geni_serial.c\"], \"defaultStatus\": \"unaffected\"}, {\"repo\": \"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\", \"vendor\": \"Linux\", \"product\": \"Linux\", \"versions\": [{\"status\": \"affected\", \"version\": \"5.7\"}, {\"status\": \"unaffected\", \"version\": \"0\", \"lessThan\": \"5.7\", \"versionType\": \"semver\"}, {\"status\": \"unaffected\", \"version\": \"5.10.165\", \"versionType\": \"semver\", \"lessThanOrEqual\": \"5.10.*\"}, {\"status\": \"unaffected\", \"version\": \"5.15.90\", \"versionType\": \"semver\", \"lessThanOrEqual\": \"5.15.*\"}, {\"status\": \"unaffected\", \"version\": \"6.1.8\", \"versionType\": \"semver\", \"lessThanOrEqual\": \"6.1.*\"}, {\"status\": \"unaffected\", \"version\": \"6.2\", \"versionType\": \"original_commit_for_fix\", \"lessThanOrEqual\": \"*\"}], \"programFiles\": [\"drivers/tty/serial/qcom_geni_serial.c\"], \"defaultStatus\": \"affected\"}], \"references\": [{\"url\": \"https://git.kernel.org/stable/c/894681682dbefdad917b88f86cde1069140a047a\"}, {\"url\": \"https://git.kernel.org/stable/c/cb53a3366eb28fed67850c80afa52075bb71a38a\"}, {\"url\": \"https://git.kernel.org/stable/c/fd524ca7fe45b8a06dca2dd546d62684a9768f95\"}, {\"url\": \"https://git.kernel.org/stable/c/b8caf69a6946e18ffebad49847e258f5b6d52ac2\"}], \"x_generator\": {\"engine\": \"bippy-9e1c9544281a\"}, \"descriptions\": [{\"lang\": \"en\", \"value\": \"In the Linux kernel, the following vulnerability has been resolved:\\n\\ntty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\\n\\nDriver\u0027s probe allocates memory for RX FIFO (port-\u003erx_fifo) based on\\ndefault RX FIFO depth, e.g. 16.  Later during serial startup the\\nqcom_geni_serial_port_setup() updates the RX FIFO depth\\n(port-\u003erx_fifo_depth) to match real device capabilities, e.g. to 32.\\n\\nThe RX UART handle code will read \\\"port-\u003erx_fifo_depth\\\" number of words\\ninto \\\"port-\u003erx_fifo\\\" buffer, thus exceeding the bounds.  This can be\\nobserved in certain configurations with Qualcomm Bluetooth HCI UART\\ndevice and KASAN:\\n\\n  Bluetooth: hci0: QCA Product ID   :0x00000010\\n  Bluetooth: hci0: QCA SOC Version  :0x400a0200\\n  Bluetooth: hci0: QCA ROM Version  :0x00000200\\n  Bluetooth: hci0: QCA Patch Version:0x00000d2b\\n  Bluetooth: hci0: QCA controller version 0x02000200\\n  Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv\\n  bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2\\n  Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)\\n  Bluetooth: hci0: QCA Failed to download patch (-2)\\n  ==================================================================\\n  BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c\\n  Write of size 4 at addr ffff279347d578c0 by task swapper/0/0\\n\\n  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26\\n  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)\\n  Call trace:\\n   dump_backtrace.part.0+0xe0/0xf0\\n   show_stack+0x18/0x40\\n   dump_stack_lvl+0x8c/0xb8\\n   print_report+0x188/0x488\\n   kasan_report+0xb4/0x100\\n   __asan_store4+0x80/0xa4\\n   handle_rx_uart+0xa8/0x18c\\n   qcom_geni_serial_handle_rx+0x84/0x9c\\n   qcom_geni_serial_isr+0x24c/0x760\\n   __handle_irq_event_percpu+0x108/0x500\\n   handle_irq_event+0x6c/0x110\\n   handle_fasteoi_irq+0x138/0x2cc\\n   generic_handle_domain_irq+0x48/0x64\\n\\nIf the RX FIFO depth changes after probe, be sure to resize the buffer.\"}], \"providerMetadata\": {\"orgId\": \"416baaa9-dc9f-4396-8d5f-8c081fb06d67\", \"shortName\": \"Linux\", \"dateUpdated\": \"2024-11-04T12:18:13.291Z\"}}}",
      "cveMetadata": "{\"cveId\": \"CVE-2022-48871\", \"state\": \"PUBLISHED\", \"dateUpdated\": \"2024-11-04T12:18:13.291Z\", \"dateReserved\": \"2024-07-16T11:38:08.921Z\", \"assignerOrgId\": \"416baaa9-dc9f-4396-8d5f-8c081fb06d67\", \"datePublished\": \"2024-08-21T06:10:01.859Z\", \"assignerShortName\": \"Linux\"}",
      "dataType": "CVE_RECORD",
      "dataVersion": "5.1"
    }
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.