CVE-2023-53523 (GCVE-0-2023-53523)

Vulnerability from cvelistv5 – Published: 2025-10-01 11:46 – Updated: 2025-10-01 11:46
VLAI?
Title
can: gs_usb: fix time stamp counter initialization
Summary
In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB.
Severity ?
No CVSS data available.
Assigner
References
Impacted products
Vendor Product Version
Linux Linux Affected: 45dfa45f52e66f8eee30a64b16550a9c47915044 , < 210a8cffc9c1b044281c0a868485c870c9c11374 (git)
Affected: 45dfa45f52e66f8eee30a64b16550a9c47915044 , < 5886e4d5ecec3e22844efed90b2dd383ef804b3a (git)
Create a notification for this product.
    Linux Linux Affected: 6.1
Unaffected: 0 , < 6.1 (semver)
Unaffected: 6.4.7 , ≤ 6.4.* (semver)
Unaffected: 6.5 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/can/usb/gs_usb.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "210a8cffc9c1b044281c0a868485c870c9c11374",
              "status": "affected",
              "version": "45dfa45f52e66f8eee30a64b16550a9c47915044",
              "versionType": "git"
            },
            {
              "lessThan": "5886e4d5ecec3e22844efed90b2dd383ef804b3a",
              "status": "affected",
              "version": "45dfa45f52e66f8eee30a64b16550a9c47915044",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/can/usb/gs_usb.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.1"
            },
            {
              "lessThan": "6.1",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.4.*",
              "status": "unaffected",
              "version": "6.4.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.5",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.4.7",
                  "versionStartIncluding": "6.1",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.5",
                  "versionStartIncluding": "6.1",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: gs_usb: fix time stamp counter initialization\n\nIf the gs_usb device driver is unloaded (or unbound) before the\ninterface is shut down, the USB stack first calls the struct\nusb_driver::disconnect and then the struct net_device_ops::ndo_stop\ncallback.\n\nIn gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more\nRX\u0027ed CAN frames are send from the USB device to the host. Later in\ngs_can_close() a reset control message is send to each CAN channel to\nremove the controller from the CAN bus. In this race window the USB\ndevice can still receive CAN frames from the bus and internally queue\nthem to be send to the host.\n\nAt least in the current version of the candlelight firmware, the queue\nof received CAN frames is not emptied during the reset command. After\nloading (or binding) the gs_usb driver, new URBs are submitted during\nthe struct net_device_ops::ndo_open callback and the candlelight\nfirmware starts sending its already queued CAN frames to the host.\n\nHowever, this scenario was not considered when implementing the\nhardware timestamp function. The cycle counter/time counter\ninfrastructure is set up (gs_usb_timestamp_init()) after the USBs are\nsubmitted, resulting in a NULL pointer dereference if\ntimecounter_cyc2time() (via the call chain:\ngs_usb_receive_bulk_callback() -\u003e gs_usb_set_timestamp() -\u003e\ngs_usb_skb_set_timestamp()) is called too early.\n\nMove the gs_usb_timestamp_init() function before the URBs are\nsubmitted to fix this problem.\n\nFor a comprehensive solution, we need to consider gs_usb devices with\nmore than 1 channel. The cycle counter/time counter infrastructure is\nsetup per channel, but the RX URBs are per device. Once gs_can_open()\nof _a_ channel has been called, and URBs have been submitted, the\ngs_usb_receive_bulk_callback() can be called for _all_ available\nchannels, even for channels that are not running, yet. As cycle\ncounter/time counter has not set up, this will again lead to a NULL\npointer dereference.\n\nConvert the cycle counter/time counter from a \"per channel\" to a \"per\ndevice\" functionality. Also set it up, before submitting any URBs to\nthe device.\n\nFurther in gs_usb_receive_bulk_callback(), don\u0027t process any URBs for\nnot started CAN channels, only resubmit the URB."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-10-01T11:46:09.632Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/210a8cffc9c1b044281c0a868485c870c9c11374"
        },
        {
          "url": "https://git.kernel.org/stable/c/5886e4d5ecec3e22844efed90b2dd383ef804b3a"
        }
      ],
      "title": "can: gs_usb: fix time stamp counter initialization",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2023-53523",
    "datePublished": "2025-10-01T11:46:09.632Z",
    "dateReserved": "2025-10-01T11:39:39.407Z",
    "dateUpdated": "2025-10-01T11:46:09.632Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.